Puppet Hub

A global network for professionals, amateurs, and people who just like puppets.



Printers and computers are an essential part of our lives. Today we are all dependent on them for almost all our work and documentation. And the compact size of the printer has largely contributed to the popularity of the printers. And when it comes to popular printer brands then HP Printers is one of the leading printers in the global market today. But even the best printer over the years with constant use can face a few issues. One of the most commonly seen problems in printers is the error code 12, which is a scanner issue. Today we will look into the causes and ways to fix the error code 12 in an HP Printer. If you come across any kind of problem while working with the printer or while following the steps mentioned in this writing then contact HP Printer Customer Support.



The issue is a very common in printers with scanners. The basic way to solve the issue is by-

  • First turn on the printer then disconnect the power cord from the printer and from the power socket.
  • If there is any USB cables attached to the printer then remove it.
  • Now wait for about two to three minutes and then press and hold the power button of your printer for about 30 seconds. This will help you remove all the additional charges.
  • Now plug back the power cable back into the socket. And also plug in the cable into the printer.
  • Now turn on the printer and wait till the warm up period is finished. Wait till the printer is in an idle position.

This should be able to fix the problem.



If the above mentioned steps are not useful then you can contact HP Printer Customer Support. A team of professional works all round the clock to ensure that you get the best service and the right solution for your entire computer and printer related problem. If you ever come across any kind of problem while working with the system then feel free to call +1-888-621-0339.

Views: 8

Comments are closed for this blog post

© 2018   Created by Puppet Hub Admin.   Powered by

Badges  |  Report an Issue  |  Terms of Service